日本SMC带逆流功能的减压阀资料
出口要压力不要超过进口压力的90%。输出压力不得超过设定压力的zui大值。
连接配管要充分吹洗。
Test method and conditions
The liquid contact portions were filled with sulphuric acid and left untouched
for half an hour. After the sulphuric acid was drained, the wetted parts are
filled with DI water. The specific resistance of the liquid discharged from the
outlet side of the sample was measured and recorded.
Model: SRF30

日本SMC带逆流功能的减压阀资料
∗Data provided in this section is just one example of the actually measured
values. Application examples illustrated in this flyer do not guarantee the
result of applicable use of this product
空气的流动方向按箭头方向安装，不得装反。
使用塑料材质的减压阀，应避免阳光直射.
Test method and conditions
Particle counters were installed before and after the test sample.
The amount of particle generated from the sample is determined by the
difference in output values from each counter.
Flow rate of supplied DI water: 100 ml/min
Model: SRF30
种类 系列 连接口径 zui高进口压力 zui低进口压力 调压范围 环境和介质温度
普通型 AR10 M5×0.8 1 设定压力
精密型 ARP3000 Rc1/4 0.8 比出口压力高10%以上 0.05~0.85