日本SMC减压阀,减压阀技术
When the MR unit’s OUT side pressure is
applied to piston , piston moves
until it balances with the force of pressure
adjustment spring . The movement of
piston is detected by switch assembly
and outputs ON and OFF signals.
出口要压力不要超过进口压力的90%。输出压力不得超过设定压力的zui大值。
连接配管要充分吹洗。
空气的流动方向按箭头方向安装，不得装反。
使用塑料材质的减压阀，应避免阳光直射.

可以根据配置条件自由选择。手轮位置：上、正面、下
 配管方向：上、下
 快换接头种类：直通接头、弯头接头
##可更换快换接头种类、尺寸。
##对应逆流功能标准。
##对应数字式压力开关。

日本SMC减压阀,减压阀技术
The set pressure can be adjusted by turning
adjustment screw , which adjusts thespring force.
Install the O-ring in the O-ring groove ofthe adapter.
2. Orient the adapter port to the desireddirection.
减压阀结构原理图。与普通减压阀的主要区别是有常泄式溢流孔。
其稳压精度高，为0.001MPa。但存在微漏。有管式连接和模块式。.
3. Using a hexagon wrench, tighten the
four hexagon socket head bolts to installan adapter.
4. Screw in the hexagon socket head cap
into the unused port of the adapterWorking principle